next up previous contents index
Next: Nonsymmetric Eigenproblems Up: Computational Routines Previous: Generalized RQ Factorization   Contents   Index


Symmetric Eigenproblems

Let A be a real symmetric or complex Hermitian n-by-n matrix. A scalar $\lambda$ is called an eigenvalue and a nonzero column vector z the corresponding eigenvector if $Az = \lambda z$ . $\lambda$ is always real when A is real symmetric or complex Hermitian.

The basic task of the symmetric eigenproblem routines is to compute values of $\lambda$ and, optionally, corresponding vectors z for a given matrix A.

This computation proceeds in the following stages:

1.
The real symmetric or complex Hermitian matrix A is reduced to real tridiagonal form T. If A is real symmetric this decomposition is A=QTQT with Q orthogonal and T symmetric tridiagonal. If A is complex Hermitian, the decomposition is A=QTQH with Q unitary and T, as before, real symmetric tridiagonal.

2.
Eigenvalues and eigenvectors of the real symmetric tridiagonal matrix T are computed. If all eigenvalues and eigenvectors are computed, this is equivalent to factorizing T as $T = S \Lambda S^T$ , where S is orthogonal and $\Lambda$ is diagonal. The diagonal entries of $\Lambda$ are the eigenvalues of T, which are also the eigenvalues of A, and the columns of S are the eigenvectors of T; the eigenvectors of A are the columns of Z=QS, so that $A=Z \Lambda Z^T$ ($Z \Lambda Z^H$ when A is complex Hermitian).

In the real case, the decomposition A = Q T QT is computed by one of the routines xSYTRD, xSPTRD, or xSBTRD, depending on how the matrix is stored (see Table 2.10). The complex analogues of these routines are called xHETRD, xHPTRD, and xHBTRD. The routine xSYTRD (or xHETRD) represents the matrix Q as a product of elementary reflectors, as described in section 5.4. The routine xORGTR (or in the complex case xUNMTR) is provided to form Q explicitly; this is needed in particular before calling xSTEQR to compute all the eigenvectors of A by the QR algorithm. The routine xORMTR (or in the complex case xUNMTR) is provided to multiply another matrix by Q without forming Q explicitly; this can be used to transform eigenvectors of T computed by xSTEIN, back to eigenvectors of A.

When packed storage is used, the corresponding routines for forming Q or multiplying another matrix by Q are xOPGTR and xOPMTR (in the complex case, xUPGTR and xUPMTR).

When A is banded and xSBTRD (or xHBTRD) is used to reduce it to tridiagonal form, Q is determined as a product of Givens rotations, not as a product of elementary reflectors; if Q is required, it must be formed explicitly by the reduction routine. xSBTRD is based on the vectorizable algorithm due to Kaufman  [77].

There are several routines for computing eigenvalues and eigenvectors of T, to cover the cases of computing some or all of the eigenvalues, and some or all of the eigenvectors. In addition, some routines run faster in some computing environments or for some matrices than for others. Also, some routines are more accurate than other routines.

See section 2.3.4.1 for a discussion.

xSTEQR
This routine uses the implicitly shifted QR algorithm. It switches between the QR and QL variants in order to handle graded matrices more effectively than the simple QL variant that is provided by the EISPACK routines IMTQL1 and IMTQL2. See [56] for details. This routine is used by drivers with names ending in -EV and -EVX to compute all the eigenvalues and eigenvectors (see section 2.3.4.1).

xSTERF
This routine uses a square-root free version of the QR algorithm, also switching between QR and QL variants, and can only compute all the eigenvalues. See [56] for details. This routine is used by drivers with names ending in -EV and -EVX to compute all the eigenvalues and no eigenvectors (see section 2.3.4.1).

xSTEDC
This routine uses Cuppen's divide and conquer algorithm to find the eigenvalues and the eigenvectors (if only eigenvalues are desired, xSTEDC calls xSTERF). xSTEDC can be many times faster than xSTEQR for large matrices but needs more work space (2n2 or 3n2). See [20,57,89] and section 3.4.3 for details. This routine is used by drivers with names ending in -EVD to compute all the eigenvalues and eigenvectors (see section 2.3.4.1).

xSTEGR
This routine uses the relatively robust representation (RRR) algorithm to find eigenvalues and eigenvectors. This routine uses an LDLT factorization of a number of translates T - sI of T, for one shift s near each cluster of eigenvalues. For each translate the algorithm computes very accurate eigenpairs for the tiny eigenvalues. xSTEGR is faster than all the other routines except in a few cases, and uses the least workspace. See [35] and section 3.4.3 for details.

xPTEQR
This routine applies to symmetric positive definite tridiagonal matrices only. It uses a combination of Cholesky factorization and bidiagonal QR iteration (see xBDSQR) and may be significantly more accurate than the other routines except xSTEGR. See [14,32,23,51] for details.

xSTEBZ
This routine uses bisection to compute some or all of the eigenvalues. Options provide for computing all the eigenvalues in a real interval or all the eigenvalues from the ith to the jth largest. It can be highly accurate, but may be adjusted to run faster if lower accuracy is acceptable. This routine is used by drivers with names ending in -EVX.

xSTEIN
Given accurate eigenvalues, this routine uses inverse iteration to compute some or all of the eigenvectors. This routine is used by drivers with names ending in -EVX.

See Table 2.10.


Table 2.10: Computational routines for the symmetric eigenproblem
Type of matrix Operation Single precision Double precision
and storage scheme   real complex real complex
dense symmetric tridiagonal reduction SSYTRD CHETRD DSYTRD ZHETRD
(or Hermitian)          
packed symmetric tridiagonal reduction SSPTRD CHPTRD DSPTRD ZHPTRD
(or Hermitian)          
band symmetric tridiagonal reduction SSBTRD CHBTRD DSBTRD ZHBTRD
(or Hermitian)          
orthogonal/unitary generate matrix after SORGTR CUNGTR DORGTR ZUNGTR
  reduction by xSYTRD        
  multiply matrix after SORMTR CUNMTR DORMTR ZUNMTR
  reduction by xSYTRD        
orthogonal/unitary generate matrix after SOPGTR CUPGTR DOPGTR ZUPGTR
(packed storage) reduction by xSPTRD        
  multiply matrix after SOPMTR CUPMTR DOPMTR ZUPMTR
  reduction by xSPTRD        
symmetric eigenvalues/ SSTEQR CSTEQR DSTEQR ZSTEQR
tridiagonal eigenvectors via QR        
  eigenvalues only SSTERF   DSTERF  
  via root-free QR        
  eigenvalues/ SSTEDC CSTEDC DSTEDC ZSTEDC
  eigenvectors via        
  divide and conquer        
  eigenvalues/ SSTEGR CSTEGR DSTEGR ZSTEGR
  eigenvectors via        
  RRR        
  eigenvalues only SSTEBZ   DSTEBZ  
  via bisection        
  eigenvectors by SSTEIN CSTEIN DSTEIN ZSTEIN
  inverse iteration        
symmetric eigenvalues/ SPTEQR CPTEQR DPTEQR ZPTEQR
tridiagonal eigenvectors        
positive definite          


next up previous contents index
Next: Nonsymmetric Eigenproblems Up: Computational Routines Previous: Generalized RQ Factorization   Contents   Index
Susan Blackford
1999-10-01