SLATEC Routines --- SBCG ---


*DECK SBCG
      SUBROUTINE SBCG (N, B, X, NELT, IA, JA, A, ISYM, MATVEC, MTTVEC,
     +   MSOLVE, MTSOLV, ITOL, TOL, ITMAX, ITER, ERR, IERR, IUNIT, R, Z,
     +   P, RR, ZZ, PP, DZ, RWORK, IWORK)
C***BEGIN PROLOGUE  SBCG
C***PURPOSE  Preconditioned BiConjugate Gradient Sparse Ax = b Solver.
C            Routine to solve a Non-Symmetric linear system  Ax = b
C            using the Preconditioned BiConjugate Gradient method.
C***LIBRARY   SLATEC (SLAP)
C***CATEGORY  D2A4, D2B4
C***TYPE      SINGLE PRECISION (SBCG-S, DBCG-D)
C***KEYWORDS  BICONJUGATE GRADIENT, ITERATIVE PRECONDITION,
C             NON-SYMMETRIC LINEAR SYSTEM, SLAP, SPARSE
C***AUTHOR  Greenbaum, Anne, (Courant Institute)
C           Seager, Mark K., (LLNL)
C             Lawrence Livermore National Laboratory
C             PO BOX 808, L-60
C             Livermore, CA 94550 (510) 423-3141
C             seager@llnl.gov
C***DESCRIPTION
C
C *Usage:
C      INTEGER N, NELT, IA(NELT), JA(NELT), ISYM, ITOL, ITMAX
C      INTEGER ITER, IERR, IUNIT, IWORK(USER DEFINED)
C      REAL    B(N), X(N), A(NELT), TOL, ERR, R(N), Z(N), P(N)
C      REAL    RR(N), ZZ(N), PP(N), DZ(N)
C      REAL    RWORK(USER DEFINED)
C      EXTERNAL MATVEC, MTTVEC, MSOLVE, MTSOLV
C
C      CALL SBCG(N, B, X, NELT, IA, JA, A, ISYM, MATVEC, MTTVEC,
C     $     MSOLVE, MTSOLV, ITOL, TOL, ITMAX, ITER, ERR, IERR, IUNIT,
C     $     R, Z, P, RR, ZZ, PP, DZ, RWORK, IWORK)
C
C *Arguments:
C N      :IN       Integer
C         Order of the Matrix.
C B      :IN       Real B(N).
C         Right-hand side vector.
C X      :INOUT    Real X(N).
C         On input X is your initial guess for solution vector.
C         On output X is the final approximate solution.
C NELT   :IN       Integer.
C         Number of Non-Zeros stored in A.
C IA     :IN       Integer IA(NELT).
C JA     :IN       Integer JA(NELT).
C A      :IN       Real A(NELT).
C         These arrays contain the matrix data structure for A.
C         It could take any form.  See "Description", below, for more
C         details.
C ISYM   :IN       Integer.
C         Flag to indicate symmetric storage format.
C         If ISYM=0, all non-zero entries of the matrix are stored.
C         If ISYM=1, the matrix is symmetric, and only the upper
C         or lower triangle of the matrix is stored.
C MATVEC :EXT      External.
C         Name of a routine which  performs the matrix vector multiply
C         operation  Y = A*X  given A and X.  The  name of  the MATVEC
C         routine must  be declared external  in the  calling program.
C         The calling sequence of MATVEC is:
C             CALL MATVEC( N, X, Y, NELT, IA, JA, A, ISYM )
C         Where N is the number of unknowns, Y is the product A*X upon
C         return,  X is an input  vector.  NELT, IA,  JA,  A and  ISYM
C         define the SLAP matrix data structure: see Description,below.
C MTTVEC :EXT      External.
C         Name of a routine which performs the matrix transpose vector
C         multiply y = A'*X given A and X (where ' denotes transpose).
C         The name of the MTTVEC routine must be declared external  in
C         the calling program.  The calling sequence to MTTVEC is  the
C         same as that for MTTVEC, viz.:
C             CALL MTTVEC( N, X, Y, NELT, IA, JA, A, ISYM )
C         Where N  is the number  of unknowns, Y is the   product A'*X
C         upon return, X is an input vector.  NELT, IA, JA, A and ISYM
C         define the SLAP matrix data structure: see Description,below.
C MSOLVE :EXT      External.
C         Name of a routine which solves a linear system MZ = R  for Z
C         given R with the preconditioning matrix M (M is supplied via
C         RWORK  and IWORK arrays).   The name  of  the MSOLVE routine
C         must be declared  external  in the  calling   program.   The
C         calling sequence of MSOLVE is:
C             CALL MSOLVE(N, R, Z, NELT, IA, JA, A, ISYM, RWORK, IWORK)
C         Where N is the number of unknowns, R is  the right-hand side
C         vector, and Z is the solution upon return.  NELT,  IA, JA, A
C         and  ISYM define the SLAP  matrix  data structure: see
C         Description, below.  RWORK is a  real array that can be used
C         to  pass   necessary  preconditioning     information and/or
C         workspace to MSOLVE.  IWORK is an integer work array for the
C         same purpose as RWORK.
C MTSOLV :EXT      External.
C         Name of a routine which solves a linear system M'ZZ = RR for
C         ZZ given RR with the preconditioning matrix M (M is supplied
C         via RWORK and IWORK arrays).  The name of the MTSOLV routine
C         must be declared external in the calling program.  The call-
C         ing sequence to MTSOLV is:
C            CALL MTSOLV(N, RR, ZZ, NELT, IA, JA, A, ISYM, RWORK, IWORK)
C         Where N is the number of unknowns, RR is the right-hand side
C         vector, and ZZ is the solution upon return.  NELT, IA, JA, A
C         and  ISYM define the SLAP  matrix  data structure: see
C         Description, below.  RWORK is a  real array that can be used
C         to  pass   necessary  preconditioning     information and/or
C         workspace to MTSOLV.  IWORK is an integer work array for the
C         same purpose as RWORK.
C ITOL   :IN       Integer.
C         Flag to indicate type of convergence criterion.
C         If ITOL=1, iteration stops when the 2-norm of the residual
C         divided by the 2-norm of the right-hand side is less than TOL.
C         If ITOL=2, iteration stops when the 2-norm of M-inv times the
C         residual divided by the 2-norm of M-inv times the right hand
C         side is less than TOL, where M-inv is the inverse of the
C         diagonal of A.
C         ITOL=11 is often useful for checking and comparing different
C         routines.  For this case, the user must supply the "exact"
C         solution or a very accurate approximation (one with an error
C         much less than TOL) through a common block,
C             COMMON /SSLBLK/ SOLN( )
C         If ITOL=11, iteration stops when the 2-norm of the difference
C         between the iterative approximation and the user-supplied
C         solution divided by the 2-norm of the user-supplied solution
C         is less than TOL.  Note that this requires the user to set up
C         the "COMMON /SSLBLK/ SOLN(LENGTH)" in the calling routine.
C         The routine with this declaration should be loaded before the
C         stop test so that the correct length is used by the loader.
C         This procedure is not standard Fortran and may not work
C         correctly on your system (although it has worked on every
C         system the authors have tried).  If ITOL is not 11 then this
C         common block is indeed standard Fortran.
C TOL    :INOUT    Real.
C         Convergence criterion, as described above.  (Reset if IERR=4.)
C ITMAX  :IN       Integer.
C         Maximum number of iterations.
C ITER   :OUT      Integer.
C         Number of iterations required to reach convergence, or
C         ITMAX+1 if convergence criterion could not be achieved in
C         ITMAX iterations.
C ERR    :OUT      Real.
C         Error estimate of error in final approximate solution, as
C         defined by ITOL.
C IERR   :OUT      Integer.
C         Return error flag.
C           IERR = 0 => All went well.
C           IERR = 1 => Insufficient space allocated for WORK or IWORK.
C           IERR = 2 => Method failed to converge in ITMAX steps.
C           IERR = 3 => Error in user input.
C                       Check input values of N, ITOL.
C           IERR = 4 => User error tolerance set too tight.
C                       Reset to 500*R1MACH(3).  Iteration proceeded.
C           IERR = 5 => Preconditioning matrix, M, is not positive
C                       definite.  (r,z) < 0.
C           IERR = 6 => Matrix A is not positive definite.  (p,Ap) < 0.
C IUNIT  :IN       Integer.
C         Unit number on which to write the error at each iteration,
C         if this is desired for monitoring convergence.  If unit
C         number is 0, no writing will occur.
C R      :WORK     Real R(N).
C Z      :WORK     Real Z(N).
C P      :WORK     Real P(N).
C RR     :WORK     Real RR(N).
C ZZ     :WORK     Real ZZ(N).
C PP     :WORK     Real PP(N).
C DZ     :WORK     Real DZ(N).
C         Real arrays used for workspace.
C RWORK  :WORK     Real RWORK(USER DEFINED).
C         Real array that can be used for workspace in MSOLVE
C         and MTSOLV.
C IWORK  :WORK     Integer IWORK(USER DEFINED).
C         Integer array that can be used for workspace in MSOLVE
C         and MTSOLV.
C
C *Description
C      This routine does not care what matrix data structure is used
C       for A and M.  It simply calls MATVEC, MTTVEC, MSOLVE, MTSOLV
C       routines, with arguments as above.  The user could write any
C       type of structure, and  appropriate  MATVEC, MSOLVE, MTTVEC,
C       and MTSOLV routines.  It  is assumed that A is stored in the
C       IA, JA, A  arrays in some fashion and  that M (or INV(M)) is
C       stored  in  IWORK  and  RWORK   in  some fashion.   The SLAP
C       routines SSDBCG and SSLUBC are examples of this procedure.
C
C       Two  examples  of  matrix  data structures  are the: 1) SLAP
C       Triad  format and 2) SLAP Column format.
C
C       =================== S L A P Triad format ===================
C       In  this   format only the  non-zeros are  stored.  They may
C       appear  in *ANY* order.   The user  supplies three arrays of
C       length NELT, where  NELT  is the number  of non-zeros in the
C       matrix:  (IA(NELT), JA(NELT),  A(NELT)).  For each  non-zero
C       the  user puts   the row  and  column index   of that matrix
C       element in the IA and JA arrays.  The  value of the non-zero
C       matrix  element is  placed in  the corresponding location of
C       the A  array.  This is  an extremely easy data  structure to
C       generate.  On  the other hand it  is  not too  efficient  on
C       vector  computers   for the  iterative  solution  of  linear
C       systems.  Hence, SLAP  changes this input  data structure to
C       the SLAP   Column  format for the  iteration (but   does not
C       change it back).
C
C       Here is an example of the  SLAP Triad   storage format for a
C       5x5 Matrix.  Recall that the entries may appear in any order.
C
C           5x5 Matrix      SLAP Triad format for 5x5 matrix on left.
C                              1  2  3  4  5  6  7  8  9 10 11
C       |11 12  0  0 15|   A: 51 12 11 33 15 53 55 22 35 44 21
C       |21 22  0  0  0|  IA:  5  1  1  3  1  5  5  2  3  4  2
C       | 0  0 33  0 35|  JA:  1  2  1  3  5  3  5  2  5  4  1
C       | 0  0  0 44  0|
C       |51  0 53  0 55|
C
C       =================== S L A P Column format ==================
C
C       In  this format   the non-zeros are    stored counting  down
C       columns (except  for the diagonal  entry, which must  appear
C       first in each "column") and are  stored in the real array A.
C       In other words,  for  each column    in the matrix   put the
C       diagonal  entry  in A.   Then   put  in the  other  non-zero
C       elements going   down the  column (except  the  diagonal) in
C       order.  The IA array holds the row index  for each non-zero.
C       The JA array holds the offsets into the IA, A arrays for the
C       beginning   of   each  column.      That is,   IA(JA(ICOL)),
C       A(JA(ICOL)) points to the beginning of the ICOL-th column in
C       IA and  A.  IA(JA(ICOL+1)-1), A(JA(ICOL+1)-1)  points to the
C       end of the ICOL-th column.  Note that we always have JA(N+1)
C       = NELT+1, where N is the number of columns in the matrix and
C       NELT is the number of non-zeros in the matrix.
C
C       Here is an example of the  SLAP Column  storage format for a
C       5x5 Matrix (in the A and IA arrays '|'  denotes the end of a
C       column):
C
C           5x5 Matrix      SLAP Column format for 5x5 matrix on left.
C                              1  2  3    4  5    6  7    8    9 10 11
C       |11 12  0  0 15|   A: 11 21 51 | 22 12 | 33 53 | 44 | 55 15 35
C       |21 22  0  0  0|  IA:  1  2  5 |  2  1 |  3  5 |  4 |  5  1  3
C       | 0  0 33  0 35|  JA:  1  4  6    8  9   12
C       | 0  0  0 44  0|
C       |51  0 53  0 55|
C
C *Cautions:
C     This routine will attempt to write to the Fortran logical output
C     unit IUNIT, if IUNIT .ne. 0.  Thus, the user must make sure that
C     this logical unit is attached to a file or terminal before calling
C     this routine with a non-zero value for IUNIT.  This routine does
C     not check for the validity of a non-zero IUNIT unit number.
C
C***SEE ALSO  SSDBCG, SSLUBC
C***REFERENCES  1. Mark K. Seager, A SLAP for the Masses, in
C                  G. F. Carey, Ed., Parallel Supercomputing: Methods,
C                  Algorithms and Applications, Wiley, 1989, pp.135-155.
C***ROUTINES CALLED  ISSBCG, R1MACH, SAXPY, SCOPY, SDOT
C***REVISION HISTORY  (YYMMDD)
C   871119  DATE WRITTEN
C   881213  Previous REVISION DATE
C   890915  Made changes requested at July 1989 CML Meeting.  (MKS)
C   890921  Removed TeX from comments.  (FNF)
C   890922  Numerous changes to prologue to make closer to SLATEC
C           standard.  (FNF)
C   890929  Numerous changes to reduce SP/DP differences.  (FNF)
C   891004  Added new reference.
C   910411  Prologue converted to Version 4.0 format.  (BAB)
C   910502  Removed MATVEC, MTTVEC, MSOLVE, MTSOLV from ROUTINES
C           CALLED list.  (FNF)
C   920407  COMMON BLOCK renamed SSLBLK.  (WRB)
C   920511  Added complete declaration section.  (WRB)
C   920929  Corrected format of reference.  (FNF)
C   921019  Changed 500.0 to 500 to reduce SP/DP differences.  (FNF)
C   921113  Corrected C***CATEGORY line.  (FNF)
C***END PROLOGUE  SBCG