SLATEC Routines --- BNDACC ---


*DECK BNDACC
      SUBROUTINE BNDACC (G, MDG, NB, IP, IR, MT, JT)
C***BEGIN PROLOGUE  BNDACC
C***PURPOSE  Compute the LU factorization of a banded matrices using
C            sequential accumulation of rows of the data matrix.
C            Exactly one right-hand side vector is permitted.
C***LIBRARY   SLATEC
C***CATEGORY  D9
C***TYPE      SINGLE PRECISION (BNDACC-S, DBNDAC-D)
C***KEYWORDS  BANDED MATRIX, CURVE FITTING, LEAST SQUARES
C***AUTHOR  Lawson, C. L., (JPL)
C           Hanson, R. J., (SNLA)
C***DESCRIPTION
C
C     These subroutines solve the least squares problem Ax = b for
C     banded matrices A using sequential accumulation of rows of the
C     data matrix.  Exactly one right-hand side vector is permitted.
C
C     These subroutines are intended for the type of least squares
C     systems that arise in applications such as curve or surface
C     fitting of data.  The least squares equations are accumulated and
C     processed using only part of the data.  This requires a certain
C     user interaction during the solution of Ax = b.
C
C     Specifically, suppose the data matrix (A B) is row partitioned
C     into Q submatrices.  Let (E F) be the T-th one of these
C     submatrices where E = (0 C 0).  Here the dimension of E is MT by N
C     and the dimension of C is MT by NB.  The value of NB is the
C     bandwidth of A.  The dimensions of the leading block of zeros in E
C     are MT by JT-1.
C
C     The user of the subroutine BNDACC provides MT,JT,C and F for
C     T=1,...,Q.  Not all of this data must be supplied at once.
C
C     Following the processing of the various blocks (E F), the matrix
C     (A B) has been transformed to the form (R D) where R is upper
C     triangular and banded with bandwidth NB.  The least squares
C     system Rx = d is then easily solved using back substitution by
C     executing the statement CALL BNDSOL(1,...). The sequence of
C     values for JT must be nondecreasing.  This may require some
C     preliminary interchanges of rows and columns of the matrix A.
C
C     The primary reason for these subroutines is that the total
C     processing can take place in a working array of dimension MU by
C     NB+1.  An acceptable value for MU is
C
C                       MU = MAX(MT + N + 1),
C
C     where N is the number of unknowns.
C
C     Here the maximum is taken over all values of MT for T=1,...,Q.
C     Notice that MT can be taken to be a small as one, showing that
C     MU can be as small as N+2.  The subprogram BNDACC processes the
C     rows more efficiently if MU is large enough so that each new
C     block (C F) has a distinct value of JT.
C
C     The four principle parts of these algorithms are obtained by the
C     following call statements
C
C     CALL BNDACC(...)  Introduce new blocks of data.
C
C     CALL BNDSOL(1,...)Compute solution vector and length of
C                       residual vector.
C
C     CALL BNDSOL(2,...)Given any row vector H solve YR = H for the
C                       row vector Y.
C
C     CALL BNDSOL(3,...)Given any column vector W solve RZ = W for
C                       the column vector Z.
C
C     The dots in the above call statements indicate additional
C     arguments that will be specified in the following paragraphs.
C
C     The user must dimension the array appearing in the call list..
C     G(MDG,NB+1)
C
C     Description of calling sequence for BNDACC..
C
C     The entire set of parameters for BNDACC are
C
C     Input..
C
C     G(*,*)            The working array into which the user will
C                       place the MT by NB+1 block (C F) in rows IR
C                       through IR+MT-1, columns 1 through NB+1.
C                       See descriptions of IR and MT below.
C
C     MDG               The number of rows in the working array
C                       G(*,*).  The value of MDG should be .GE. MU.
C                       The value of MU is defined in the abstract
C                       of these subprograms.
C
C     NB                The bandwidth of the data matrix A.
C
C     IP                Set by the user to the value 1 before the
C                       first call to BNDACC.  Its subsequent value
C                       is controlled by BNDACC to set up for the
C                       next call to BNDACC.
C
C     IR                Index of the row of G(*,*) where the user is
C                       to place the new block of data (C F).  Set by
C                       the user to the value 1 before the first call
C                       to BNDACC.  Its subsequent value is controlled
C                       by BNDACC. A value of IR .GT. MDG is considered
C                       an error.
C
C     MT,JT             Set by the user to indicate respectively the
C                       number of new rows of data in the block and
C                       the index of the first nonzero column in that
C                       set of rows (E F) = (0 C 0 F) being processed.
C
C     Output..
C
C     G(*,*)            The working array which will contain the
C                       processed rows of that part of the data
C                       matrix which has been passed to BNDACC.
C
C     IP,IR             The values of these arguments are advanced by
C                       BNDACC to be ready for storing and processing
C                       a new block of data in G(*,*).
C
C     Description of calling sequence for BNDSOL..
C
C     The user must dimension the arrays appearing in the call list..
C
C     G(MDG,NB+1), X(N)
C
C     The entire set of parameters for BNDSOL are
C
C     Input..
C
C     MODE              Set by the user to one of the values 1, 2, or
C                       3.  These values respectively indicate that
C                       the solution of AX = B, YR = H or RZ = W is
C                       required.
C
C     G(*,*),MDG,       These arguments all have the same meaning and
C      NB,IP,IR         contents as following the last call to BNDACC.
C
C     X(*)              With mode=2 or 3 this array contains,
C                       respectively, the right-side vectors H or W of
C                       the systems YR = H or RZ = W.
C
C     N                 The number of variables in the solution
C                       vector.  If any of the N diagonal terms are
C                       zero the subroutine BNDSOL prints an
C                       appropriate message.  This condition is
C                       considered an error.
C
C     Output..
C
C     X(*)              This array contains the solution vectors X,
C                       Y or Z of the systems AX = B, YR = H or
C                       RZ = W depending on the value of MODE=1,
C                       2 or 3.
C
C     RNORM             If MODE=1 RNORM is the Euclidean length of the
C                       residual vector AX-B.  When MODE=2 or 3 RNORM
C                       is set to zero.
C
C     Remarks..
C
C     To obtain the upper triangular matrix and transformed right-hand
C     side vector D so that the super diagonals of R form the columns
C     of G(*,*), execute the following Fortran statements.
C
C     NBP1=NB+1
C
C     DO 10 J=1, NBP1
C
C  10 G(IR,J) = 0.E0
C
C     MT=1
C
C     JT=N+1
C
C     CALL BNDACC(G,MDG,NB,IP,IR,MT,JT)
C
C***REFERENCES  C. L. Lawson and R. J. Hanson, Solving Least Squares
C                 Problems, Prentice-Hall, Inc., 1974, Chapter 27.
C***ROUTINES CALLED  H12, XERMSG
C***REVISION HISTORY  (YYMMDD)
C   790101  DATE WRITTEN
C   890531  Changed all specific intrinsics to generic.  (WRB)
C   891006  Cosmetic changes to prologue.  (WRB)
C   891006  REVISION DATE from Version 3.2
C   891214  Prologue converted to Version 4.0 format.  (BAB)
C   900315  CALLs to XERROR changed to CALLs to XERMSG.  (THJ)
C   900326  Removed duplicate information from DESCRIPTION section.
C           (WRB)
C   920501  Reformatted the REFERENCES section.  (WRB)
C***END PROLOGUE  BNDACC